Welcome, You are logged in as Guest

Quanum Observer FPV Plane Plastic EPO 1980mm

The Quanum Observer is a purpose designed FPV/Camera plane with a host of neat features that make this model one of the best in its class. 

For toughness and reliability, the model features a blow moulded fuselage which utilizes Nylon and is virtually indestructable. The flying surfaces are all made from tough EPO foam.

From point of view of practicality, the two piece wings require no glue for assembly, everything simply screws together. The outer canopy is purely for looks though unclips in seconds to reveal a camera ready platform, complete with a pan/tilt servo mounting hole that has been pre-moulded. This large hatch cover is secured by a quick release latch and once removed, reveals a huge cockpit area for mounting batteries and FPV equipment onto the pre-fitted ply plate.

All servos, the motor & ESC come pre-installed and optional flaps can be added easily by installing your own 9g servos and hardware.

The whole Observer airframe can be assembled and ready for flight in about an hour, with auxillary equipment taking slightly longer. Multiple mounting options in the Observer for cameras, flat mount on the aft fuselage, and even a flat underside of the forward fuselage means the utmost in flexibility for a variety of tasks.

There is no doubt that this is a superbly designed, high quality FPV model at an excellent price. The flat mounting platform on the aft fuselage allows you to separate your FPV transmitter from other sensitive radio equipment like your flight receiver.

The Quanum Observer takes FPV and aerial survellance platforms to the next level with its host of mounting features, quick assembly, and rugged nature. For the every day FPV enthusiast, or for more serious aerial photography, the Quanum Observer ticks all the boxes.


• Plug and Fly - Just add radio sytem, battery and fly!

• Blow molded plastic fuselage with EPO wings and tail

• All bolt together construction, no glue required

• Easy access canopy/hatch section

• Removable canopy reveals flat FPV camera mounting base

• Aft fuselage equipment mounting platform separates FPV equipment from radio equipment

• Optional wing flaps for nice slow landings

• Spare parts available


Wingspan: 1980mm

Length: 1170mm

Flying Weight: 1500g w/o Battery

Motor: 3715 1000kv brushless Outrunner

ESC: 40A w/BEC

Servo: 9g x 4


4~5 Channel Transmitter and Receiver

3~4S 11.1~14.8V 3300~10000mAh Lipoly Battery

4 ( 4 / 5 )


Great flying platform. Handles a lot of weight. I fly it with a 10A 3S battery. Too bad you receive only one propeller that also needed a bit of balancing.
5 ( 5 / 5 )


Very well packed. All in one piece. Assembly is quick. The parts fits well together. When screwing into the fuse remember that it is soft plastic, not composite - stripping thread happens easily do not over tighten. Flies well with a 8000mah 30C battery.

Write a review

Note: HTML is not translated!
    Bad           Good
  • Brand: Quanum
  • Product Code: Quanum Observer FPV Plane Plastic EPO 1980mm
  • £130.00
  • £100.00

  • Price with VAT: £100.00
  • Availability: Out Of Stock

Related Products

Turnigy 5000mah 3S 11.1v 20C-30C Lipo Battery

SpecificationsMinimum Capacity: 5000mAhConfiguration: 3S1P / 11.1v / 3CellConstant Discharge: 20CPea..

£21.00 Price with VAT: £21.00

Turnigy SK450 Quad Copter PNF

Introducing the Turnigy SK450 quad copter powered by Multistar. Turnigy set out to make a great valu..

£80.00 Price with VAT: £80.00

TBS Caipirinha FPV Flying Wing ARF 850

Designed specificially for FPV use, the Caipirinha makes a great introduction to fixed-wing FPV flyi..

£80.50 Price with VAT: £80.50

Facebook Comments ()